Thermal Evaporation Plant
The Thermal Evaporation Plant or a Solar Evaporation Plant (TEP, SEP) with the addition of Advanced Solar Generators, is a multiblock structure that converts water to Brine, and Brine & Lithium by the use of a second TEP.
Construction
Follow these steps, where each step is a layer above the previous one, and centered on the same point. you may ONLY use the advanced or simple top. The differences between the simple and the advanced top's are the temperature and production rate; the simple version saves on resources but is less productive. The Thermal Evaporation Controller and Thermal Evaporation Valve have no predefined positions and can be set anywhere in the structure above the base layer.
The minimum height of the structure is 3 blocks. To increase the internal storage and rate of evaporation, the structure can be raised up to 18 blocks high.
Speed Up
To accelerate the rate of production beyond simply placing advanced solar generators at the top, the player must import a source of heat into a valve. This is most easily done by placing a resistive heater next to a valve. Setting the energy consumption to 1250 FE/t will provide the maximum boost, with any higher consumption having no effect.
Refrences
https://ftb.gamepedia.com/Thermal_Evaporation_Plant
|