Induction Matrix: Difference between revisions
(Added things about how you must have at least 1 induction provider & 1 induction cell.) |
mNo edit summary |
||
| Line 9: | Line 9: | ||
* All edges of the block must be made using [[Induction Casing]]. | * All edges of the block must be made using [[Induction Casing]]. | ||
* All faces (other than edges) can be filled using either [[Induction Casing]] or [[Induction Port]] in any configuration (regardless of how the inside is set up). | * All faces (other than edges) can be filled using either [[Induction Casing]] or [[Induction Port]] in any configuration (regardless of how the inside is set up). | ||
* The inside of the cube can be filled with either [[Induction Providers]], [[Induction Cells]] or air blocks. However, you need at least 1 [[Induction Cells|Induction Cell]] and 1 [[Induction Providers|Induction Provider]]. Without at least 1 [[Induction Providers|Induction Provider]] the Induction Matrix cannot send or receive power. | * The inside of the cube can be filled with either [[Induction Providers]], [[Induction Cells]] or air blocks. However, you need at least 1 [[Induction Cells|Induction Cell]] and 1 [[Induction Providers|Induction Provider]]. Without at least 1 [[Induction Providers|Induction Provider]], the Induction Matrix cannot send or receive power. | ||
* The inside of the cube components do not need to match in tier. | * The inside of the cube components do not need to match in tier. | ||
Revision as of 22:43, 25 April 2017
The Induction Matrix is a highly configurable multi-block energy storage structure. It is built using Induction Casing and Induction Port for the casing, and any combination of Air, Induction Providers and Induction Cells.
Creation Rules
A correctly formed Induction Matrix will spark once with Redstone Particles when you place down the last block, and will also have an interface when right clicking the block.
Assembly rules:
- The Induction Matrix will only form if the structure is a rectangular prism smaller than 18x18x18[citation needed].
- All edges of the block must be made using Induction Casing.
- All faces (other than edges) can be filled using either Induction Casing or Induction Port in any configuration (regardless of how the inside is set up).
- The inside of the cube can be filled with either Induction Providers, Induction Cells or air blocks. However, you need at least 1 Induction Cell and 1 Induction Provider. Without at least 1 Induction Provider, the Induction Matrix cannot send or receive power.
- The inside of the cube components do not need to match in tier.
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Cookies help us deliver our services. By using our services, you agree to our use of cookies.
