Pressurized Reaction Chamber

Revision as of 16:06, 9 June 2015 by Zakdwyer (talk | contribs) (Water Pump -> Electric Pump)
Pressurized Reaction Chamber
Pressurized Reaction Chamber.png
Pressurized Reaction Chamber
Mod

Mekanism

Type

Machine

Tool

?

Stackable

No

The Pressurized Reaction Chamber (PRC) is used primarily to create Substrate, HDPE Pellets and Ethylene. It has a variable speed and energy usage dependent on the materials/gasses it is creating.

Usage

The Pressurized Reaction Chamber accepts a liquid, a gas, and a material(s); it uses these three substances to create another material(s) and some leftover gas. Like many other Mekanism machines, it has configurable sides; by default, it accepts gas from the left, accepts liquid from the back, and outputs gas on the right.

Recipes

Energy Used Speed Input Liquid Input Gas Input Material Output Material Output Gas
5 J/t Normal Water (10 mB) Hydrogen (10) Bio Fuel (2) Substrate (1) Ethylene (100)
205 J/t Slow Water (200 mB) Ethylene (100) Substrate (1) Substrate (8) Oxygen (10)
1000 J/t Normal Liquid Ethylene (50 mB) Oxygen (10) Substrate (1) HDPE Pellet (1) Oxygen (5)

Setup


PRC Substrate Setup

The image on the left is an example setup of a Pressurized Reaction Chamber creating Substrate from Water, Hydrogen, and Bio Fuel.

A - A Gas Tank outputting Hydrogen. Gas Tanks output through their side with a red rectangular mark into Pressurized Tube. You can obtain Hydrogen naturally by using an Electrolytic Separator.
B - A Portable Tank outputs water through Mechanical Pipe. Notice that the end of the Mechanical Pipe touching the Portable Tank has been configured using a Configurator to "PULL". You can obtain water naturally by using the Electric Pump.
C - A powered Crusher crushes nature ingredients into Bio Fuel and outputs it through Logistical Transporter piping. Again, note that the piping has been set to "PULL".
D - The resulting Ethylene (Gas) from the reaction is sent through Pressurized Tube into a Gas Tank.
E - The Pressurized Reaction Chamber itself. It has been configured to accept items from its top (Items - Red), accept Energy through its bottom (Energy - Green), accept gases from its left (Gases - Red), accept fluids from its back (Fluids - Yellow), and output gases from its right (Gases - Blue - Auto Eject: On).

Crafting Recipe


Enriched Alloy
Grid layout Arrow (small).png Pressurized Reaction Chamber
Control Circuit Enrichment Chamber Control Circuit
Gas Tank Dynamic Tank Gas Tank

Tips

  • If you need to clear a liquid or gas from the input gauges, use the Gauge Dropper; simply open the Pressurized Reaction Chamber's GUI (by right-clicking it), take an empty Gauge Dropper from your inventory, and click on the gauge with the liquid or gas that you want to extract. You can then either shift+right-click on the ground with the Gauge Dropper to empty it and continue to extract the gas or liquid by repeating the previous steps, or drop it into a Gas Tank or Portable Tank's input slot on its interface (marked with either an "I" or a "-") to move the substance into the receptacle without wasting it.
  • Remember that Liquid Ethylene is not the same as Ethylene. To create HDPE Pellets, you must first convert the Ethylene into Liquid Ethylene using a Rotary Condensentrator. Have it accept Ethylene from its "G" (Gas) side, and output Liquid Ethylene from its "L" (Liquid) side, and leave it in "Condensentrating" mode.



Cookies help us deliver our services. By using our services, you agree to our use of cookies.

Need wiki hosting?

Do you need a wiki for your Minecraft mod/gaming wiki? We'll host it for free! Contact us.

Other wikis

Indie-game wikis
Powered by Indie Wikis